The latest in directional feeding technology. Two years in development, but well worth the wait. The Texas Hunter Products DF125 Directional Feeder rests at ground level and delivers feed over a wide wedge-shaped area. The feed is propelled forward and away from the feeder. This prevents attracting wildlife and varmints directly to the feeder. It is equipped complete with the EZ612 digital timer for precise regulation of feeding cycles. The unit is capable of up to 9 feeding periods per day. Each feeding can be from 1 to 60 seconds. This unit is used primarily as a fish feeder. It can also be used to feed deer and other wildlife.
This brand-new unit is equipped with two motors. This allows the first lower motor to reach full speed before any feed is released. The second upper motor then cuts on releasing feed for the desired amount of time. The top motor then turns off and a few seconds later the bottom motor turns off. The result is no feed is wasted. All feed is propelled out into your lake or pond. No feed drops at the base of the feeder.
This design eliminates the need for special shut off gates at the base of the feeder.These shut off gates have caused problems in other directional feeders. This unit is available with two different type leg sets. Order the DF125DL if you intend to place the feeder on a dock. Order the DF125AL if the feeder will be sitiing on the bank of a lake or pond. Click Here: DF125DL to see the DF125DL: Dock Leg Version that is designed to be place on a dock. Benefits/Features
Brand-new two motor design
Powerful 12-volt motors and centrifugal air blower assembly
Feed is delivered in a wedge-shaped pattern: 45 feet in length by 20 feet in width
.focus();){kind=small}