Sweeney Feeders Scatter Feeder - 100 lb. Capacity - (Solar Charger Included)

Sweeney Feeders Scatter Feeder - 100 lb. Capacity - Galvalume (Solar Charger Included)

- - - FREE SHIPPING - SALE ENDS October 31st - - -

Features

• 100 lb. capacity hopper built from heavy-gage galvanized steel that shrugs off seasons the way a mature buck shrugs off trail cameras
• DFT3REV8 premium timer and BT1245 battery included right out of the box so you're ready to deploy from day one
• Internal motor housed inside the hopper keeps moisture, critters, and corrosion away from your investment
• Dual built-in front and rear sight gauges let you check feed levels from any angle without pulling the lid
• Lockable lid hinged at the back opens easily and keeps curious animals and unwanted hands out of your feed supply
• Brass shaft resists binding and wear season after season, even in wet or heavy-use conditions
• Scatter plate with swinging gate mechanism eliminates clogging for consistent, reliable feeding every cycle
• Optimized spread pattern delivers up to a 60-foot coverage radius when hung at the right height, maximizing feed efficiency
• Pre-wired solar panel port makes adding the optional SX212 Solar Charger a plug-and-play upgrade
• Lightweight enough to transport and set up solo in remote locations or when scouting new feeding spots
• Steel legs provide stable, level support on uneven terrain
• Available in Galvalume or Green finish to match your property and blend into the landscape

Specifications

• SKU: SFC100GR-PT
• Capacity: 100 lb.
• Finish Options: Galvalume
• Timer: DFT3REV8 (Premium Timer, included)
• Battery: BT1245 (included)
• Solar Panel Port: Pre-wired
• Hopper Material: Heavy-gage galvanized steel
• Shaft Material: Brass
• Package Dimensions: 17 x 17 x 29 inches
• Shipping Weight: 40 lb.

Description

Most hunters don't need a feeder the size of a grain silo, they need one that's the right size for the job. The Sweeney Feeders Scatter Feeder at 100 lb. capacity was built exactly for that reality. Whether you're managing a small private tract under 100 acres, running a flexible hunting property where you move feeders between spots, or just tired of topping off a half-empty 300-pound unit every other week, this feeder hits the sweet spot between meaningful nutrition and genuine convenience. At 40 pounds shipped in a single 17 x 17 x 29 package, you can actually get this thing into the timber without renting a forklift or calling in a favor from your biggest buddy.

Sweeney Feeders has been engineering wildlife feeders for over 50 years, and that experience shows up in the details that matter in the field. The hopper is fabricated from heavy-gage galvanized steel built to handle rain, heat, and everything in between. The internal motor lives inside the hopper where it's shielded from moisture and corrosion, so you're not pulling a rusted-out motor off a tree six months into season. The brass shaft resists the kind of binding and wear that takes cheaper units out of commission, and the scatter plate's swinging gate mechanism keeps feed flowing clean without the clogging headaches that turn feeding mornings into frustrating ones. Dual sight gauges front and rear mean you can check your feed level without opening the lid every time you walk by.

Setup and placement are straightforward. Hang the feeder a few feet off the ground and you get a full 60-foot spread radius. Position it within 30 yards of cover and you're putting the feed where the deer feel safe using it. The DFT3REV8 premium timer gives you reliable, programmable feeding control right out of the box with the included BT1245 battery. When you're ready to take it to the next level, the pre-wired solar panel port accepts the optional SX212 Solar Charger so you can keep the battery topped off in off-grid locations without a second thought. The lockable lid keeps your feed secure from tampering and animals between visits, and steel legs keep everything level and stable even on less-than-perfect ground.

This is the kind of feeder that earns its spot on your property year after year. It's not oversized, not underpowered, and not complicated to run. It fits properties where a giant commercial unit would be overkill, holds enough feed to deliver real nutritional impact, and is built from the kind of materials that hold up when you're not around to babysit it. Available in Galvalume or Green, it blends into the landscape and gets to work without drawing attention. That's exactly what a well-run feeding program looks like.

Check Out The Full Lineup Of Sweeney Feeders Gear

 Sweeney Feeders 

Why Hunters Love It

Hunters who run small to mid-size properties consistently run into the same problem with oversized feeders: too much dead time between fills, too much feed sitting in a hot hopper going stale, and too much unit to haul when you want to shift your feeding location mid-season. The Sweeney Feeders 100 lb. Scatter Feeder solves all three. It's large enough to hold meaningful feed, light enough to move when scouting tells you the deer are using a different corner of your property, and built from the kind of hardware that doesn't need constant attention to keep running right.

The details that Sweeney put into this unit are the kind that experienced hunters notice immediately. A brass shaft instead of a cheap steel one, a motor that actually stays dry, sight gauges on both sides of the hopper so you're not guessing when it's time to refill, and a pre-wired solar port because they know most serious hunters eventually go solar in remote locations. After 50-plus years of building feeders, Sweeney understands that a feeder isn't just a bucket with a motor. It's part of your overall wildlife management strategy, and this one is built to play that role well for a long time.

Frequently Asked Questions

How long will 100 lbs. of corn or feed last in this feeder?
That depends entirely on your timer settings and the local deer population hitting the feeder. A typical setup running two feed cycles per day at moderate duration can stretch 100 lbs. over two to three weeks easily. On a smaller property with lighter deer traffic, you could see even longer intervals between fills, which is one of the main reasons this size is popular for properties under 100 acres.

Does the DFT3REV8 timer come pre-programmed or do I need to set it up myself?
The DFT3REV8 timer ships included with the feeder and requires you to set your preferred feeding times and durations. It's an intuitive programmable unit and Sweeney Feeders provides clear instructions. Most hunters have it dialed in within a few minutes of unboxing. The included BT1245 battery powers it right away so there's no delay getting it operational.

Can I add a solar charger to this feeder?
Yes, and Sweeney made it easy. The feeder comes with a pre-wired solar panel port designed to accept the optional SX212 Solar Charger. If you're running this unit in a location where battery swaps are inconvenient, adding the solar charger is a straightforward plug-in upgrade that keeps everything topped off without extra trips to the feeder.

What height should I hang the feeder to get the best spread pattern?
Sweeney recommends hanging the feeder at least a few feet off the ground to achieve the full 60-foot spread radius. Too low and the scatter pattern tightens up significantly, wasting the potential coverage area. Getting the height right makes a noticeable difference in how evenly the feed distributes and how many animals can comfortably feed at the same time.

Is this feeder large enough for a serious deer management program or is it better suited for casual use?
It's genuinely well-suited for a structured deer management program on properties under 100 acres. The 100 lb. capacity delivers meaningful daily nutrition, the programmable timer gives you reliable feeding schedules, and the build quality is consistent with Sweeney's 50-plus years of wildlife management focus. For larger properties running multiple feeders, this unit works well as a satellite feeder or supplemental station alongside a larger primary unit.

Does the feeder handle weather well in humid or wet climates?
The heavy-gage galvanized steel hopper and internal motor placement are specifically designed to handle moisture exposure. The motor sitting inside the hopper rather than hanging outside it is a meaningful design choice that keeps the most vulnerable component away from rain and condensation. The brass shaft also resists corrosion-related binding that tends to take cheaper feeders offline in wet climates over time.

What is included in the box when the feeder ships?
The feeder ships as a single package measuring 17 x 17 x 29 inches at 40 pounds and includes the assembled hopper, steel legs, the DFT3REV8 premium timer, and the BT1245 battery. The optional SX212 Solar Charger is sold separately. Both Galvalume and Green finish options are available at the time of ordering.